External turning tool- MCLNR2525M12

Our Products Advantages:

1. Firm clamping
2. High precision
3. Easy insert replacement
4. For general use
5. Suitable to use cutting fluid

6. Various types, can be made as client's request

If you are interested in our products, please feel free to contact us,  we are highly appreciating your inquiry and will serve you sincerely.

we can also design and produce non-standard tools according to customers' special requirment.

Chengdu Tweak NC tools CO.,LTD is professional manufacturer and exporter of standard and non-standard carbide inserts, CBN/PCD inserts,turning inserts,milling inserts and other various NC tools.

Warning:
1.The blade should not too long than holder , if the blade is too long ,it will weakend the holder’s rigidity,when cutting it ,it’s easy to be vibrated and influence the surface’s flash.   

2. The tool tip should be aim at the center of the component, the height of the tool will be cause the change of the turning tool’s angle to influence the cutting.
 
3.The shim need to smooth ,and as much as possible to reduce the number of slices ,2-3tablets is enough ,and if the shim is too much or not smooth ,it will cause the vibrate and influence the cutting.
 
4.When installed ,you need to tighten the holder screw,and generally ,you need to tighten the two screws.when tighting it,you need to tighten it one by one.what’s more ,you need to use the special wrench preferably without bushing,to avoid the screw damage.

.